Future Million Dollar Inventions and Ideas

Want to invent that million dollar invention or idea and be set for life? It’s not terribly likely that you can do such a thing, but it’s not out of the question either.

History is full of individuals who achieved great wealth with a new invention or a new idea. Ray Crock who franchised Mc Donald’s, Steve Jobs and Apple computer, Bill Gates and his operating system, snugglies, spanks, and someone is even making a fortune because he came up with the idea of slip on cardboard coffee cup holders so you don’t burn your fingers while holding that paper cup latte.

Here are the areas where I think the small individual inventor or innovator has the best chance of coming up with that revolutionary device or idea that will make him or her independently wealthy.

Harvesting Machines for Fruits and Vegetables

Very few fruits and vegetables are harvested by machine. There are tomato harvesters and potato harvesters but not much else for fruits and vegetables. If someone can com up with a harvester for apples or oranges or similar fruit the will make a huge killing. It will truly be a million dollar invention.

Other crops that are exclusively hand harvested are asparagus, all kinds of citrus, squash, brussel sprouts, cauliflower, and man others. I’ve almost got an asparagus harvester working, you can see my latest version at my asparagus harvester website.

Energy Production

Obviously energy is always going to be needed and with oil eventually running out there are many new competing technologies for generating electricity. Opportunities abound with areas such as wind power, ocean wave power, solar cells, biofuels, and more. Figure out a way to generate electricity that costs less than generating electricity with oil or gas and you have a winner.

A Better Razor

Just image how much money you can make selling razors. Nearly every man and woman in the US and many other parts of the world shaves. How about a new kind of razor that you could use to get a comfortable and close shave with just plain water? Even better would be a razor like the above that needs a new blade every week. You could have millions and millions of customers purchasing replacement blades weekly or monthly.

The Internet

First there was America Online, soon there was ebay, craigs list, facebook, twitter, and god knows how many other social networking and other online methods of making money. All of the previous mentioned items started out as an idea. You can have ideas too. Come up with a great online game that everyone wants to play. My wife is currently addicted to a farming game on facebook I think. Find some new way of helping the masses communicate with each other is another idea, and one will probably emerge this year in my opinion. Flex your creativity and come up with the next big thing on the internet.

Geriatric Products

Anything that helps older people get along as they grow old should be big. Soon the baby boomers will all be old, so find a way to make life easier for them. This could involve the internet and some sort of social media thing too. Interesting areas for new devices include things that make bathing easier, taking medications and keeping track of medications, exercise equipment, sleeping aids, and all sorts of other convenience items.

Cooking and Food Preparation

Everybody eats and they eat every day. Come up with some food preparation or cooking device that makes preparing or cooking food easier and then sell it on those infomercials. There is a lot of money in it, just come up with something simple and clever that makes a kitchen chore easier or quicker.

Water and Energy Conservation

As previously mentioned, energy is big. Find a good inexpensive method of saving energy. Saving water is just as important and will only get more important. Find a new way to desalinate water, or purify water, or a way to save large amounts of water.

These are just a few suggestions, there are countless others awaiting your discovery. Go forth and Invent and Innovate! Be the next one to come up with that million dollar invention or idea!

Simple Machine Inventions - New Invention Idea Needed

Simple machine inventions are quite gratifying to come up with. Simple is so much better than complicated, at least in my opinion. I’ve come up with a few simple ones, my paper burster, hydrothermal stabilizer, quick-shot foam dispensing nozzle, and even my asparagus harvester could be considered simple machines.

There is however, a new invention idea that needs to be invented. A cat toy that will keep my cats occupied for a few hours a day so they stop pestering me to play with them. I’ve made a bunch of different things for the cats to play with, but nothing high tech.

One of my better cat toys consisted of a large piece of brown wrapping paper about 2 feet square. I taped a long piece of rubber band to the center of the paper with duct tape, and attached the other end of the rubber band to a small plastic ball. Then I place the paper with the ball side down on the floor.

The cats loved it. They would pounce on the lump under the paper and push it and pull it and finally they would end up tearing the paper and capturing the ball. But as with all of the other toys they get used to it and get bored.

It seems to me that a cat toy has to be interactive with the cat in order to keep it interested. With all the available electronics that should not be too difficult. A microcontroller, a couple of sensors, maybe a motor or two or a solenoid and a little creativity and the cats will have there interactivity.

I’ve written more about possible ways of using simple machine inventions for cat toys in this article: New Invention Idea – Toys for Cats. I go into more detail about my ideas for these simple machine inventions for use as interactive toys for cats.

Think small things that move quickly and try to hide. At least that’s what my cats like the best. Little hunters they are.

So please, if you can come up with a great interactive toy for cats please let me know when they go on sale… I’ll be the first one to buy one. Unless of course I come up with something first.

Outsourcing To China – Problems Crop Up Continued…

We outsourced our pump manufacturing to China, due to our inability to find a manufacture in the US that could provide us the pumps at a price we could make a profit with. It’s not such an easy process. Good communications are critical, and so if you have to deal with a very small Chinese manufacturer you need a good go-between person who is fluent in both English and Chinese.

We were having a problem with a seal, well not us, the Chinese manufacturer. We were life testing the seals for the pump, as was the manufacturer. His seals consistently failed after a short time. Using the same parts and test procedures, (we thought), our tests were working out just fine.

I finally after weeks of going back and forth trying to find out the details I asked him to send me one of the “failed” seals.

It turns out that the manufacturer meant “leaked” when he said the seal “failed”. We wasted over a month trying to figure out what was making the seal fail before we found out it wasn’t a seal failure after all. It was another part that was failing and causing the leak, not the seal. It turned out they were testing with a slightly higher pressure than we were, which caused a plastic part to fail.

Good translation is obviously important when you are dealing with a manufacturer on the other side of the globe.

Injection Mold Tooling Problems

We have found the tooling for our plastic injection molded parts are somewhat sloppy. The parting lines are all obvious and slightly out of place, the ejector pins don’t all land on the surface they are intended to, everything is done kind of half-assed if you ask me.

Keep in mind, this was a very low budget, and with our limited funds we didn’t really have a lot of choices. The tooling works and produces parts that work, but they aren’t very pretty.

Getting code approvals in China

Working with ETL testing labs in China was just as difficult. I had to argue constantly with the Chinese engineers who worked at the ETL facility in China. Thank god for the Internet! I always won the arguments, but it took a lot of work researching and supplying documentation to the Chinese engineers.

I remember one disturbing argument; the Chinese engineer was telling me the fuse I was using for the motor was too small and needed to be bigger.

What? Bigger? How is a bigger fuse safer? It was a very surreal experience. Fuses take time to burn out. If a fuse is rated for 2.5 amps, and you run 2.6 amps through it, it may take several hours to blow. If you run 3 amps through it, it may take 30 minutes to blow. If you run 10 amps through it, it will blow in a second or two etc.

Our fuse was to protect against “locked rotor” conditions in the motor. Locked rotor is where the motor shaft is held and not allowed to rotate. Our locked rotor current would blow the fuse we were using in about 2 seconds, well before anything got hot enough to cause a fire. The fuse they were specifying would have taken several minutes to blow and danger of fire would be very real.

They finally relented and allowed us to use a fuse smaller than what they wanted but still larger than we would have liked. The one we use blows in less than 10 seconds at locked rotor conditions, but I would rather it blow in less than a second.

I’ll have more Chinese outsourcing stories in the future… some good, some bad, and some just plain funny.

More about our outsourcing experience

A New Patent - How to get a Patent or Patent Protection

Getting a patent for a new hot water system

I filed for a new patent a few days ago. The patent is for an improved hot water delivery system for residential and commercial buildings.

The new hot water delivery system is capable of providing faster than normal hot water delivery to any fixture in a home or building, and only to that fixture where the hot water is needed.

The basic idea is to place a pump at the water heater which when running will create a pressure difference between the hot and cold water lines with the hot water lines having the larger pressure.

At each fixture a cross-over valve connects the hot and cold water lines. The valve has a controller which has a temperature sensor in contact with the water in the valve. Each valve controller also has a communications link with the pump.

When you want hot water at any particular fixture you activate the valve by pressing a button that is either hard wired to the valve or uses a radio frequency transmitter to activate the valve. The valves can get their power from either the house current or batteries. Batteries would be great for retro-fit installations. We estimate the battery life to be a minimum of two years using four AA cells per valve.

When you press the button activating the valve, it checks the temperature of the water at the fixture, and if the water is not already hot, the valve controller sends a signal to the pump to begin pumping. The valve controller also at the same time opens the valve between the hot and cold water lines. Thus hot water begins flowing from the water heater with the cooled off hot water in the hot water piping being sent back towards the water heater through the cold water line which hooks to the inlet of the water heater somewhere.

So basically that is the new invention. Let’s examine the steps I’ve taken for protection so far. In a future blog I will cover how the patent attorney and I worked out the details of the patent, especially the patent claims.

After my partner and I decided we had a good idea for a new product we knew we needed to get patent protection. My partner found a patent attorney through a relative, a lawyer working for a very large and expensive firm. But what the heck, hopefully we would be able to obtain a good solid patent that could be enforced in the market place.

Foreign patent protection is complex and expensive. Very expensive. We decided to stick to just he US and Canada. Canada adds about $1,500 to the cost of filing.

I don’ remember all of the costs at this point, I did not sign the checks, the company did. I will be looking them up and reporting on all the details as far as expenditures go in the near future.

Our patent lawyer explained to us that the least expensive way to get some form of patent protection on our new idea was to do what she called a “document dump”. We gave her documents that explained the invention in detail, and she did the “document dump” which serves as proof in a court of law of when we first thought of the idea. Of course we could have thought of it 10 years before that, but this is absolute proof that you had thought of if by at least the day of the dump.

The reason we went with that was we had no money to pursue a patent, and this was the least expensive way to obtain some protection.

More about patenting the new hot water system in a future blog.

Bill the old inventor guy.